How to Replace a Golf Club Shaft at Home

How to Replace a Golf Club Shaft at Home – Easy Guide in 2022

Are you a golf enthusiast? If so, you probably know the importance of changing the golf club shaft regularly.

Replacing shafts on a regular interval guarantees top-notch utility from every use. So, it is imperative to alter the golf shaft every three to six months.

Apart from that, there can be a broken shaft emergency at any point. But getting the alteration done from a welding shop is not an economic option.

On that account, replacing the golf club shaft at home can save the day.

Still and all, many users avoid the alteration considering it as a hectic procedure. Well, we admit the procedure can be a bit tiring.

However, small modifications and a little expertise can make adjusting a golf club shaft effortless. In this piece of writing, we will be focusing on making the golf shaft adjustment a no-brainer game.

Let’s make you a club shaft adjustment expert in no time!

See Also: Fairway Wood Shaft – Top 5 Selection.

Steps to Replace a Golf Club Shaft at Home

Steps to Replace a Golf Club Shaft at Home

Installing or replacing golf club shafts can be tiring because of the time it consumes. And this is the reason why many people walk away from this task.

However, we have taken an alternative approach in this regard.

To make the procedure effortless and fuss-free, we have divided it into small segments. That way, the task becomes easy to follow. And you will be sure if you are moving in the right way.

Let’s begin then!

Step 1: Choosing the Right Golf Club Shaft

To begin with, you will need to get your hands on a golf club shaft. While choosing club shafts, check if the shaft size is the same as the previous or the original one.

Here is why.

An ill-fitted golf club shaft will not fit inside the head hosle of the club. The junction point between the tip and head of the shaft is a hosel.

If you are unsure about the perfect size for your shaft, you can use a shaft identification gauge.

See More: Sand Wedge Loft – Top 5 Models Reviewed by an Expert.

Step 2: Cleaning the Club

Now, take out your utility knife. You will need to scrape the ferrule from the bottom of the hosel.

To heat up the ends of the hosel and get rid of the epoxy glue, you will need a heat gun. Ultimately, you

will get a softer edge to loosen up the previous shaft from the hosle.

We recommend placing the club on a shaft clamp to avoid any mishaps. Do not forget to check if the clasp closure is in order or not.

Step 3: Taking the Shaft Out

It is now time to release the head from the shaft. For that, you will need a pry bar. The pry bar will help in pushing the hosle base to take out the previous shaft.

Now comes the difficult part- to wait before moving to the next step.

We recommend you wait for a while until the shaft cools down completely. In the meantime, take a break. Make yourself a cup of coffee and get other works done.

Step 4: Scrapping off Any Residuals

Any residual paint or glue can create trouble in the fixing of the new shaft. In addition, the paint scrapes don’t look very appealing and disturb the overall aesthetic of the club shaft.

On that account, it is wise to take off the residual paint. You can use either sandpaper or a utility knife to get the job done.

There is an additional step if you are using a graphite club shaft. You might require to scrape a layer of coating from the tip as well. You can find ways to Loft for Driver by clicking here.

Step 5: Installing a New Shaft

From this step afterward, we will work with a new shaft.

You can get away with any epoxy glue from the market. Nevertheless, the strength, quality, and cure times of the glues may vary.

Here, the thumb rule follows this way- the longer it takes to dry, the higher will be the strength or hold. Hence, it is imperative to pick suitable and quality epoxy glue.

Apply a generous amount of epoxy glue on the tip of the shaft. Then insert the shaft inside the base of the hosle.

Now give the shaft a few rotations in the left and right direction. This step will ensure that the epoxy glue gets an even distribution inside the hosel.

That way, there are fewer chances of the shaft falling off the base of the hosle.

Step 6: Finishing Touches

Now it is time to take off the shaft from the clamp.

To get a better attachment, we recommend tapping the butt end of the grip a few times on the floor. This will seal the deal by pushing the shaft all the way inside the head.

After that, take a soft cloth to get rid of any epoxy residual. Let the golf club rest for a while (preferably a day) before using it.

With that, you have successfully replaced a golf club shaft!

Final Words

Final Words

This is not a stiff procedure. You can always make modifications here and there. Follow the procedure that works out for you.

Replacing a golf club shaft may come up as a demanding procedure at the first sight. Nevertheless, we hope the scenario is different now.

Share your thoughts with us on the process. Would you like to bring any modifications here? We will love to hear from you.