How to Make a Nerf Gun Wall

How to Make a Nerf Gun Wall – Definitive Guideline for Newbie and Experts in 2022

As a child who does not want to have an amazing room. And if you are planning to decorate your kids room with cool stuff then what can be a better option than nerf gun wall.

For those who do not know what nerf gun wall is, A Nerf Blaster is a toy gun that shoots foam darts, discs, or foam balls. The word “Nerf gun” is frequently used to describe the toy; but, it is also frequently used as a catch-all term for any foam dart blaster, regardless of whether or not it bears the Nerf brand name.

Some people think it is hard to make a nerf gun wall, but it is easier than you think. Here we would provide some simple and easy ideas to decorate your boy’s room and by following those steps you can make your son the happiest.

Also Read: Nerf Darts – 5 High-Quality Models That Will Save Your Day.

How to Make a Nerf Gun Wall

Make a Nerf Gun Wall

Before you start with the procedure, it is necessary to keep all the necessary materials together. The materials that will be needed to make the nerf gun wall are:

  • Wood for frame
  • Pegboard
  • Paint or spray paint
  • Pegboard hooks and bins
  • Drywall screws
  • Finishing nails
  • Permanent market
  • Measurement tape
  • Screwdriver
  • Hammer
  • Drill
  • Level
  • Paintbrush

Step 1: Make the Wall Frame

To begin with the process, you need to take the wood and make the frame. For the Nerf wall,it is necessary to create two frames. The back frame acts as a spacer between the pegboard hooks.

When constructing the frames, you must trim the ends of the 8 boards at a 45-degree angle.

Then, using metal brackets, secure two boards in the corner. Rep this step for the remaining boards, resulting in two frames.

Step 2: Paint

After that you need to paint the frame. In order to do that you can use one or multiple types of colours.  Paints can also be used and these are very easy to work with.  In the case of painting the border with multiple colours, wrap the tape to the person or you don’t want to paint and that is how it is easy to create a simple design. This takes very little time to paint the whole frame, and applying at least two coats ensures an even coverage. Try to spray it the night before to make sure it was absolutely dry for hanging.

Step 3: Measure and mark

After all of the paint has dried up, use tape to wrap the outer edge of the unpainted frame. Measure and mark the location where your pegboard will be hung. Set the same frame on a flat surface, then place the painted side of the pegboard on top.

Attach the pegboard to the frame with 3/4′′ wood screws after ensuring that the edges are properly aligned. Get a good quality Sports Duffel Bags Top 5 picks.

Step 4: Place the plastic spacer

Mark the pegboard with these measurements using the stud positions on the wall so you can pre-drill holes for the drywall screws.

Following that, mount the pegboard/frame to the wall by aligning the stud positions with the pre-drilled holes.

Place the plastic spacer behind the board, and then thread the washer and screw through the front. Tighten using a drill. As you can see, our board is about 1 1/2′′ away from the wall. It provides us enough room to put the hooks into the pegboard while remaining near enough to the wall to look great and not feel weird.

Step 5: Insert hook

How it is time to attach the hook to hang the nerf gun. Depending on your requirements, insert a choice of hooks and baskets. At the local hardware stores, there are a half-dozen hook alternatives. Grab a range of items because you never know when you need which type of hook.

As you arrange your guns, you’ll need to use a little trial and error to place the pegboard hooks. Bins for ammo, eyewear, and smaller firearms can also be added. After placing the guns in various ways, you will get to understand which position is more suitable. Or you can just use creativity to arrange the guns.

Final Words

Nerf Gun Wall

Parents always want to be “cool” in front of their children and want to make them happy. And you can do it by placing the kids favorite item in their bedroom. As you already know how to make a nerf gun wall and is quite easy. If you find this article helpful, share it with friends and family. Have a great time!