How to Adjust M6 Driver

How to Adjust M6 Driver – Easy Method Explained in 2022

If you are a golf enthusiast, you probably have heard about Taylormade M6 drivers. From Tiger in the Masters to Dustin in Augusta, the secret that changed their game was an M6 driver.

Regardless of the level of expertise, the M6  driver adapts to the needs of the user. Once you step to the primary tee confidently, you are sure to get maximum advantage in terms of speed and distance.

Considering all the aspects, you might think of investing in a Taylormade M6 driver.

But hold on! Are you acquainted with adjusting the M6 drivers?

If you are unsure about the procedure of adjusting a Taylormade M6 driver, don’t worry. We have designed an instruction to make the procedure plain sailing for you.

So let’s get through the steps to get a quick fix on your M6 driver.

What Makes M6 Driver Special?

What Makes M6 Driver Special?

Before beginning with setting up an M6 driver, we would like to take a moment.  Here, we want to take a moment to focus on the individuality of this Taylormade driver.

What makes a Taylormade M6 drivers stand out from other available alternatives? To know the Loft for Driver, you can click here.

Unlike other golf drivers, the Taylormade M6 driver allows users to adjust the fits for every need. Additionally, the drive provides plenty of speed with every throw.

If you are new to golf, trying out the M6 driver will allow you to experience the magic of speed. You will get effortless long and straight shots from the twisted pattern of this driver.

Steps to Adjust M6 Driver Accurately

Steps to Adjust M6 Driver Accurately

We know the procedure may seem demanding in the beginning. Nevertheless, there is no rocket science involved in the process.

To get the task done, all you need to know is the basics of adjusting drivers.

To make the process easier, we have divided the total procedure into two parts. The first part involves fixing the sleeves. After that, we will then move on to fixing the ball flight control.

Let’s get started then!

Fixing the Sleeves

In order to adjust the sleeves, you will need to take off the screws first. Then carefully remove the club head from the shaft.

You can use the wrench that comes with the driver to take off the screw. That way, the detaching task gets effortless.

All you need to do is to set the wrench on the screw and move it in an anti-clock direction. After a few rotations, you will see the clubhead has started to come off.

And if you want to close the screw, rotate the wrench in a clockwise motion. You can find Sounding Golf Driver in this article.

Now, you are all set to tune on the sleeves. As fixing the sleeves is a customizable task, there are plenty of scopes for alterations.

If you look closely into the shaft, you will notice some indentations around the shaft. Follow the markings to achieve your desired setting for the club head and shaft.

Typically, there are four settings for adjusting the shafts (STD, higher, lower, and the UPRT position).

If you go for a standard position in your sleeves, you can get a square face from hits. The loft, too, will be generic. You will get a lie angle of 56 degrees from this setting.

On the contrary, things will be different if you go for a lower setting. The angle will widen by four degrees and the loft will face a cut-off of two degrees.

Added to that, the lie angle will sit at fifty-eight degrees. Plus, the RPM will have a reduction of 400 RPM.

Again, things will take another turn with a higher setting. Here, the face angle will close up by four degrees. Whereas the loft will rise by two degrees higher than the standard positioning.

Moreover, this setting will add 400 RPM to your driver’s spin and the lie angle will be set at 58 degrees.

For the demand of incremental modifications, you will need to opt for a UPRT position.

Depending on your set of preferences, you can opt for any setting.

Now, you are all set to move to the next step.

Fixing the Ball Flight Control

If you want to make adjustments in the ball fight control, you can do that as well.

To do so, you will need to alterations to the weight track system of the shaft. Don’t be fret! It is light in weight and easy to move.

Here, you will find a solo ten-gram weight. That will help you in adjusting the golf driver as your desired shot shape.

For beginners, we will recommend trying out different adjustments to the ball fight. That allows you to find the best adaption to your swing.

The next step will be to have a trial on the various adjustments.

To get neutral positioning, you will need to position the weight to the center of the track.

With the weight positioned towards the toe, users will get a position with maximum fade.

And if you want to simply get the max draw adjustment, just position the weight towards your heel. With that, you are now all set to go. Get a good quality Sand Wedge Loft Top 5 picks.

Final Words

Final Words

Professional or enthusiast- we recommend everyone to take a trial with the M6 driver. The Taylormade driver is sure to make your hours in the court brighter.

Even though the process of adjustment may appear tiring, the case is hopefully different now. We hope our instruction helped make the fixing process of no sweat. Top 5 Fairway Wood Shaft An expert reviews and buying guide.

We look forward to hearing the experience from you.

Now get in the court and hit some balls!